Home Extended Storage Tips

5. Spray a light layer of glue on the door and material, let it rest for a few minutes. Lay the material over the door and proceed to push and pull all the way around. You will not need a heat gun, etc.., the material is soft and pliable enough to go around any of the angles of the panel.

6. Make sure not to get any glue on the material. Start working the edge around with a screwdriver. Press all the way down around the edges and start cutting the excess with a good pair of small scissor or a small blade. Work promptly, things will start getting pretty sticky by now. Make sure that the material sits tightly against the whole surface.

Process of glueing the material begins..

7. See how the material adhered in OEM fashion. After cutting the edges, then cut the holes for the handle and switches, do not rush at this point. After trimming and cutting is completed, let the material dry for an hour or so before installation.

8. Finished product. And drying before installation.

9. Project completed and fully assembled.

Click here for Pt. 3

Home Extended Storage Tips Storage Photo Gallery Links and Ratings Contact me